SHOWTEC Performer 2000 RGBAL, Manual

Page: 23 / 40

22
Ordercode: 33038
Performer 2000 RGBAL
7.5. DMX Error
In this menu you can determine what the device will do in case of a DMX signal error.
01)
When the display shows DMX ERROR, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between the 2 options: SAVE and BLACK.
03) If the display shows SAVE, the Performer will utilize the last working DMX signal, which will ensure
undisrupted performance.
04) If the display shows BLACK, the Performer will black out.
7.6. Performance
In this menu you can set the performance of the cooling fan.
01)
When the display shows PERFORMANCE, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle through the 3 modes:
 LIVE: Default mode. It provides a compromise between output quality and noise level.
 STUDIO: Noise level-oriented mode. It emits little noise and operates at moderate power level.
 POWER: Output-oriented mode. The device does not offer any consideration for noise level and
operates at full power.
7.7. MCON (DMX data transfer)
In this menu you can set the DMX data transfer settings.
01)
When the display shows MCON, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle between the 2 options:
 SELF: DMX data transfer OFF
 MASTER: DMX data transfer ON