SHOWTEC Performer 2000 RGBAL, Manual

Page: 22 / 40

21
Ordercode: 33038
Performer 2000 RGBAL
7.1. Upload
In this menu you can send the custom programs to the slave devices.
01)
When the display shows UPLOAD, press the ENTER button to open the menu.
02) The display will show PASS CODE and you will need to insert a key combination which will unlock this
hidden menu. To do so, press the buttons in the following order: UP, DOWN, UP, DOWN, ENTER.
03) While exporting, the slave devices will light in yellow.
04) If there are any problems with exporting, the master and the slave devices will light in red.
05) If the operation was completed successfully, the master and the slave devices will light in green.
7.2. Reset
In this menu you can reset the settings.
01)
When the display shows RESET, press the ENTER button to open the menu.
02) The display will show PASS CODE and you will need to insert a key combination which will unlock this
hidden menu. To do so, press the buttons in the following order: UP, DOWN, UP, DOWN, ENTER.
03) The device will now reset its settings.
7.3. Color
In this menu you can set the color mixing.
01)
When the display shows COLOR, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to choose one of the 3 color mixing options:
 UC: The RGB output is adjusted to a standard preset universal color. In this way, different
Performer versions are color-balanced, in order to match each other.
 RGBtoW: RGB = 255, 255, 255. The displayed color is the specific color which you have calibrated
in Calibration menu (see page 24).
 OFF: The RGB settings are: 255, 255, 255. The RGB values are not adjusted and the output is the
most powerful.
7.4. Dimmer
In this menu you can set the dimmer speed.
01)
When the display shows DIMMER, press the ENTER button to open the menu.
02) Press the UP/DOWN buttons to toggle through the 5 options:
 OFF: Dimmer speed is off
 DIM1-DIM4: Dimmer speed, from fast to slow