SHOWTEC Performer 2000 RGBAL, Manual

Page: 21 / 40

20
Ordercode: 33038
Performer 2000 RGBAL
5. Run Mode
In this menu you can set the device as a master or slave.
01)
While in main menu, press the UP/DOWN buttons until the display shows RUN MODE.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 options: DMX and SLAVE.
04) If the display shows DMX, the Performer will become a master device and will utilize the DMX
protocol to determine its performance.
05) If the display shows SLAVE, the Performer will become a slave device and will react the same as the
master device.
6. Personality
In this menu you can set the desired DMX channel mode (personality).
01)
While in main menu, press the UP/DOWN buttons until the display shows PERSONALITY.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle through the 4 channel modes:
 HSIC 8-channel mode
 SSP 10-channel mode
 TOUR 13-channel mode
 TR16 19-channel mode
7. Setting
In this menu you can adjust the device’s special settings.
01)
While in main menu, press the UP/DOWN buttons until the display shows SETTING.
02) Press the ENTER button to open the menu.
03) The display will show PASS CODE and you will need to insert a key combination which will unlock this
hidden menu. To do so, press the buttons in the following order: UP, DOWN, UP, DOWN, ENTER.
04) Press the UP/DOWN buttons to toggle through the following options:
 UPLOAD
 RESET
 COLOR
 DIMMER
 DMX ERROR
 PERFORMANCE
 MCON
 PWM_RATE
 POWER_CCT