29
Order code: 40102
Polar 300 Hybrid IP65 Moving Head
4.3.2. Custom IP
In this menu you can configure manually the IP address of the device.
01)
Press the ENTER/BACK buttons to move the cursor respectively to the right/left on the display. The
selected number will be highlighted.
02)
Press the UP/DOWN buttons to change the number. The selection range is between 0 and 255.
03)
Press the ENTER button to confirm and to move to the next number.
04)
Repeat steps 1–3 for each of the 3 editable sections of the IP address. To change the starting
number of the IP address, see 4.3. Network on page 28.
4.4. Signal
In this submenu you can set the signal preferences if wireless DMX is enabled.
Note: These settings are functional only if the wireless module is installed. The Polar 300 Hybrid is delivered
without a wireless module. To hide these settings, please refer to 4.2.4. WDMX Hide on page 28.
01)
Press the UP/DOWN buttons to scroll through the following 5 options:
02)
Press the ENTER button to confirm your choice.
The available options are:
●
ONLY XLR
●
XLR FIRST
●
ONLY WDMX
●
WDMX FIRST
●
WDMX TO DMX:
When linking multiple Polars, you can set a wireless connection of the first
device to your computer and link the rest of the devices using a DMX cable
Summary of Contents for 40102
