15
Order code: 40102
Polar 300 Hybrid IP65 Moving Head
Multiple Polars (Art-Net/sACN Control/RDM)
01)
Fasten the effect light to a firm trussing or mount it on flat surface. Leave at least 1,3 m on all sides
for air circulation.
02)
Secure the device with a safety cable (order code 70454 / 70456).
03)
Use a CAT-5/CAT-6 cable to connect the Polar and other devices.
04)
Connect your computer with installed Art-Net software to the first device’s RJ45 "in" socket.
05)
Link the units as shown in Fig. 09. Connect the first unit's RJ45 "out" socket with the second unit's "in"
socket, using a CAT-5/CAT-6 cable. Repeat this process to link the rest of the units.
06)
Supply electric power: Plug electric mains power cords into each unit's power IN socket, then plug
the other end of the mains power cord into proper electric power supply sockets, starting with the
first unit. Do not supply power before the whole system is set up and connected properly.
Fig. 09
Note: Link all cables before connecting electric power
Note: The Polar 300 Hybrid supports Art-Net to DMX, which means that you can connect the first device
to your computer using a CAT-5/CAT-6 cable and the rest of the devices can be linked using a DMX
cable. For more information, see 3. Run Mode on page 26.
Summary of Contents for 40102
