27
Order code: 40102
Polar 300 Hybrid IP65 Moving Head
●
DISPLAY ON:
If you choose ON the display will not turn off. If you choose OFF, the display
will turn off after 60 seconds of inactivity
●
DISPLAY LOCK:
See 4.1. Display Lock for more information
●
LOAD PARA:
Upload the parameters of Custom Program 1 and/or 2 from the master
device to the slave device in master/slave mode (NO/YES)
●
SETTING:
See 4.2. Settings for more information
●
NETWORK:
See 4.3. Network for more information
●
PT ENCODER:
If the encoder is turned on (ON), the device will automatically correct the
pan/tilt position, if it deviates from the last saved value (OFF/ON)
●
WDMX RESET:
Resets wireless connection and clears all receiver’s messages (NO/YES)
●
SIGNAL:
See 4.4. Signal for more information
4.1. Display Lock
In this submenu you can activate the display lock.
01)
Press the UP/DOWN buttons to toggle between ON and OFF.
●
ON:
Display lock is on. The display turns off after 60 seconds of inactivity. To
access the Main Menu, you will need to enter the password. The default
password is pressing the UP/DOWN buttons in the following order: UP, DOWN,
UP, DOWN
●
OFF:
The Main Menu remains unlocked after the display turns off
02)
Press the ENTER button to confirm your choice.
Note: Deactivating the display lock does not affect the submenu items which by default require a
password.
4.2. Settings
In this submenu you can reset some of the device’s parameters.
01)
Press the UP/DOWN buttons to scroll through the following 4 options:
02)
Press the ENTER button to confirm your choice.
4.2.1. Recovery
In this submenu you can restore the default factory settings. This submenu requires a password.
01)
Press the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN.
02)
Press the ENTER button to confirm the password and start the resetting.
4.2.2. Clean Edit 1
In this submenu you can clear all settings of Custom Program 1. This submenu requires a password.
01)
Press the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN.
02)
Press the ENTER button to confirm the password. All changes made in EDIT 1 (see pages 30–31) will be
reset.
4.2.3. Clean Edit 2
In this submenu you can clear all settings of Custom Program 2. This submenu requires a password.
01)
Press the UP/DOWN buttons in the following order: UP, DOWN, UP, DOWN.
02)
Press the ENTER button to confirm the password. All changes made in EDIT 2 (see pages 30–31) will be
reset.
Summary of Contents for 40102
