SHOWTEC 40102, Manual

Page: 13 / 60

12
Order code: 40102
Polar 300 Hybrid IP65 Moving Head
Setup and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 110 V specification product on 240 V power, or vice versa.
Connect the device to the main power supply.
Control Modes
There are 5 modes:
● Stand-alone (Auto program, Custom programs)
● Manual
● Master/Slave
● DMX-512 (20 CH, 24 CH, 28 CH)
● Art-Net/sACN (20 CH, 24 CH, 28 CH)
One Polar (Auto Program, Custom Programs)
01)
Fasten the effect light to a firm trussing or mount it on flat surface. Leave at least 1,3 m on all sides
for air circulation.
02) Secure the device with a safety cable (order code 70454 / 70456).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Polar is not connected with a DMX cable, it functions as a stand-alone device.
05) Please see 3. Run Mode on page 26 for more information.
One Polar (Manual)
01)
Fasten the effect light to a firm trussing or mount it on flat surface. Leave at least 1,3 m on all sides
for air circulation.
02) Secure the device with a safety cable (order code 70454 / 70456).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Polar is not connected with a DMX cable, it functions as a stand-alone device.
05) Please see 6. Manual on page 31 for more information.