23
Phantom 250 Spot
Product code: 40081
Built-in Programs Mode
In this menu you can set the DMX channel mode, slave mode, auto programs, sound-controlled mode
and manual operation.
01)
While in the main menu, press the UP/DOWN buttons to choose
.
02)
Press the ENTER button to open the menu.
03)
Press the UP/DOWN buttons to select one of the 5 modes:
04)
Press the ENTER button to open the desired submenu.
DMX
01)
Press the UP/DOWN buttons to select one of the 2 DMX channel modes:
●
12 channels
●
16 channels
02)
Press the ENTER button to confirm your choice.
Slave
01)
Press the UP/DOWN buttons to set the device as the 1
st
, 2
nd
, 3
rd
or 4
th
slave device (Slave1–4).
02)
Press the ENTER button to save changes.
03)
The device is now operating in slave mode. It means that it will react the same as the master device.
Each mode (Slave1–4) mirrors the master device in a different way.
Auto
The device will run the built-in auto show.
Sound
In this menu you can activate the sound-controlled operation mode. The device runs the auto program
reacting to the beat of the music. See 6.6.3. Advanced Settings on page 25 for information about the
sensitivity settings of the built-in microphone.