19
Phantom 250 Spot
Product code: 40081
6.
Operation
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as a spot light moving head. It is suitable only for indoor
installation. This device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
Control Modes
The Phantom 250 Spot supports the following control modes:
Stand-alone:
Auto operation mode (auto programs), manual operation mode, sound-
controlled operation mode (auto program)
Master/Slave:
Auto operation mode (auto programs), manual operation mode, sound-
controlled operation mode (auto program)
DMX-512:
12, 16 channels
For more information about how to connect the devices, refer to 5. Setup on pages 16–18.
To operate the device manually as a stand-alone device or in a master/slave setup, adjust all the settings
in Manual menu. See 6.6.2.5. Manual on page 24 for more information.
To run the built-in programs in auto operation mode without a DMX controller, activate Auto menu. See
6.6.2.3. Auto on page 23 for more information.
For more information about sound-controlled operation mode see 6.6.2.4. Sound on page 23.
To operate the device with a DMX controller:
01)
Set the DMX starting address of the device in the DMX Address menu. See 5.3.5. DMX Addressing on
page 18 and 6.6.1. DMX Address on page 22.
02)
Select the DMX channel mode. See 6.6.2.1. DMX on page 23 for more information. See 6.7. DMX
Channels on page 26 for complete overview of all DMX channels.