Showa 5683, Operation Manual

Page: 29 / 68

３−８
Fig3-6 Position of dip switch
3.5 How to Switch Special Function Setting
By switching dip switches on the bottom face of Models 5683/5684 amplifiers, settings for special
functions can be made.
- ON/OFF for cable length compensation
- ON/OFF for bridge check function
- Decimal point shift for digital monitor (3)
Dip switch Function Description
1 2 3 4
ON↓
Factory-set
(Factory-set settings)
Cable length compensation function:
(Switch 1 is Off.)
Bridge check function: ON (Switch 2 is
On.)
Decimal point of digital monitor (3),
displaying decimal point at the fourth place:
10.000 (Switches 3 and 4 are On.)
1 2 3 4
ON↓
Cable length compensation
function
(Switch 1 changeover)
Cable length compensation function: OFF
(Switch 1 up: Off)
Cable length compensation function: ON
(Switch 1 down: On)
1 2 3 4
ON↓
Bridge check function
(Switch 2 changeover)
Bridge check function: OFF
(Switch 2 up: Off)
Bridge check function: ON
(Switch 1 down: On)
1 2 3 4
ON↓
Decimal point indication
(Setup through the combinations
of switches 3 and 4)
Displaying the decimal point of digital
monitor (3) at the third place: 100.00
1 2 3 4
ON↓
Decimal point indication
(Setup through the combinations
of switches 3 and 4)
Displaying the decimal point of digital
monitor (3) at the second place: 100.00
1 2 3 4
ON↓
Multipoint indication
(Setup through the combinations
of switches 3 and 4)
No indication of the decimal point on digital
monitor (3): 10000
Table3-5
ON/OFF switching for dip switches is possible when the amplifier is turned on.
Front panel
Rear panel
dip switches