Document Number: 0004593
Rev: 1
Page 9
13 – Install Idler Corners
Slide the idler corner shafts into the roll tubes of the side curtain and end curtain. Line up the holes, insert the
1-1/4” machine screws, and tighten (as shown). Do the same on the opposite corner.
14 – Self-tap the Corner Splices
Adjust the top corner splices and curtain as needed and self-tap the screws through the curtain as shown. Tap
the screws closest to the corner first, then the screws through the curtain.
End
curtain
Side
curtain
Corner Drive
Corner Drive
Idler Corner
Idler Corner
Top View of ShoreScreen
