Document Number: 0004593
Rev: 1
Page 5
3 – Connect Tube Splices
Use a #3 square bit to drill the self-tap screws through the side tubes and splice as shown. There is a bundle of
side tubes and a bundle of end tubes, be sure to use the side tubes.
4 – Slide Tubes into Curtain
Slide the connected side tubes into the top of the side curtain and the end tubes into the top of the end
curtains as shown.
5 – Hang the Side Curtains
Start on the ends and put the top curtain tubes in the curtain clamps, and push the pin through the clamps to
secure the curtain. Then, repeat with all other clamps.
Long tubes
Tube splice
