Document Number: 0004593
Rev: 1
Page 6
Make sure the plastic keder strip is facing up and is toward the outside of the boathouse as shown below.
6 – Slide Tubes into Curtain
Slide the connected side tubes into the bottom of the side curtain and the end tubes into the bottom of the
end curtains as shown.
7 – Connect Splice to Roll Tube
Use the 1-1/4” machine screws to join one side roll tube with one roll tube splice as shown. 24’ and 26’
curtains have one splice on each side and the 28’ curtain and bigger has 2 splices on each side.
Outside of boathouse
Keder strip
Inside of boathouse
Curtain
Roll Tube Splice
Roll Tube
