Document Number: 0004593
Rev: 1
Page 10
Slide the corner splice into the lower tube of the side curtain and end curtain on all corners. Adjust as needed,
match the corner above, and self-tap the screws through the curtain as shown.
15 – Splice Cover
Snap on the plastic splice cover to the roll tube.
16 – Relay Placement
Place the relay assembly on the curtain tube, about half way down the curtain on the power side of the
boathouse, and use the self-tap screws to secure it to the top side tube. The relay assembly may have to be
adjusted depending on length of harness needed to reach the motors.
The upper limit switch automatically stops the curtain from rolling too high and into the relay assembly box. If
necessary it may be adjusted to prevent damage.
Self-tap screw
Self-tap screw
Upper Limit
Switch
