DETAIL B
DETAIL A
B
A
STEP 5
Place the Rack Sides in the Lift Sides
as shown with Connection Angles
facing out.
A - Set the Hole end of the cable into
the slot in the front of the lift side.
Secure with one Bolt 1/2 x 5.5, two
Washers Flat 1/2 and one Nut 1/2 - as
shown in Detail "A."
B - Insert the Bolt end of the cable
through the hole in the top of the Lift
Side in the rear of the lift. Secure with
one Washer Flat 1/2 and two Nuts 1/2.
Note:
Be sure washer is in place and
that the Nuts are tightened so at least
1/4" of Bolt thread is exposed on the
bolt end of the cable.
Lift Side Opposite
Lift Side Winch
Right Rack Side
Left Rack Side
Washer Flat 1/2
Bolt 1/2 x 5.5
Use This Hole
Hole End
of Cable
Nut Flange 3/8
Galv Nut 1/2
Washer Flat 1/2
Use This Hole
Bolt End
Of Cable
Connection Angle
Washer Flat 1/2
FRONT
REAR
