STEP 3
Slide end of cable into slotted opening on winch
hub. Using a 3/16" Allen Wrench, tighten winch
hub set screw to secure cable to winch hub.
NOTE:
Cable must enter at slotted end of opening
through hub as shown. Slide cable fully into hub
opening. However do not go so far that the cable
sticks out the other side of hole. This would
interfere with proper cable wrapping.
STEP 4
Set cover on winch and secure with the three
screws that were removed in Step 1 - as shown.
Set Screw
Cable Hole
In Slot
Cable
Screw
Winch
