DETAIL A
DETAIL C
DETAIL B
A
C
B
STEP 6
A - Attach the Front and Rear Racks to the Rack
Sides. Secure at each end with three Bolts 1/2 x
3.5, three Spacers, six Washers Flat 1/2 and two
Nuts 1/2 - as shown in Detail "A."
NOTE:
Rack Side Angles should face out and
down.
B - Secure bottom end of the Rear Rack cables
to the Lift Sides by inserting the washer on the
end of the cable into the large hole in the slot and
slide it to the back of the slot secure with one Bolt
1/2 x 5.5, two Washers Flat 1/2 and one Nut 1/2 -
as shown in Detail "B." The bolt should hold the
cable from coming out of the slot.
C - Insert the Bolt End of the Front and Rear
Rack cables through the specified hole in the top
of the Lift Sides. Secure each cable with one
Washer Flat 1/2 and two Galvanized Nut 1/2 as
shown in Detail "C."
Use This Hole
Galvanized Nut 1/2
Washer Flat 1/2
Use This Hole
Bolt End
of Cable
Bolt 1/2 x 3.5
Nut 1/2
Washer Flat 1/2
Spacer
Front or Rear Rack
Right or Left Rack Side
Bolt 1/2 x 5.5
Washer Flat 1/2
Washer Flat 1/2
Nut 1/2
Washer Flat 1/2
Rear
Front
