28
Retrieving Tag Data
In order to generate reports, a tag must fi rst be scanned or connected via USB. Once successfully connected or scanned,
TrekView tags or readers will automatically download recorded temperature data.
READING A TAG
All TrekView Tags have the ability to connect directly to a PC without the need for a Reader (Desktop or Handheld). There
are two USB options available.
TREKVIEW INTERNAL USB
•
To connect a TrekView internal USB tag to a PC, tear at the notched end. This action will expose the zipper seal.
•
Open the zipper seal and pull back the paper tab to expose the micro USB port.
•
Connect the Micro USB cable to the tag and to a PC.
•
Reseal the zipper for the tag’s next use.
•
Note: It is not recommended that the tag be removed from the plastic pouch
TREKVIEW EXTERNAL USB
•
To connect the tag, simply plug the external USB on the tag into a PC.
TREKVIEW SOFTWARE
tag, si
r the tag’s next use.
mended that the tag be removed from the plastic pouch
USB
imply plug the external USB on the tag into a PC
imply plug the external USB on the tag into a PC.
TrekView Internal USB
TrekView External USB
Summary of Contents for Trekview
Page 1: ...1 TREKVIEW MANUAL ...