12
TREKVIEW TAGS
TrekView Tags - USB Options
TREKVIEW INTERNAL USB
TrekView Tags are available with an internal USB port. These tags are contained in a zipper pouch with a sealed end.
There is a notch in the sealed end. In order to connect the tag to a PC, tear the sealed end off of the pouch. Begin the tear
at the notch. This action will expose the zipper seal. Open the zipper seal and pull back the paper tab to expose the micro
USB port.
Note: It is not recommended that the tag be completely removed from the plastic pouch.
After the tag information is downloaded, the zipper seal should be resealed for the tag’s next use. This option is available
for customers who order multi-use tags and need a water-resistant solution. Once the zipper pocket is opened, you will
need a micro USB to USB cable to plug the tag into your PC.
Note: Opening the zipper pouch reduces the NEMA rating from
NEMA 6 to NEMA 4.
TREKVIEW EXTERNAL USB
TrekView Tags are available with an external, exposed USB cable To connect the tag, simply plug the external USB cable
on the tag into your PC.
When connected, the tag LEDs will blink, confi rming a successful connection.
TrekView Tags have dual download capabilities. If a tag’s USB port is damaged, the tag data can be retrieved by
scanning the tag with a TrekView Reader. The tags can also be confi gured or activated using a TrekView Reader.
TREKVIEW EXTERNAL USB
cessful connection.
g’s USB port is damaged, the t
t
ag
ag
d
d
at
at
a can be retrieved by
TrekView Internal USB
FRONT
TrekView Internal USB
BACK
Tear at the notch
to access the mini
USB port.
Micro USB to USB cable
Summary of Contents for Trekview
Page 1: ...1 TREKVIEW MANUAL ...
