background image

KEEP THIS WARRANTY

WARRANTY INFORMATION

Model

 ______________________________

Serial No.

 ___________________________

Date Purchased

 _____________________

Always specify model and serial numbers when communicating with the 

factory.

RMH-130-OMSOL

Rev. 1.3 

06/2014

LIMITED WARRANTY

SHM International Corp. warrants the components of this appliance to be free from defects in material and 

workmanship for one (1) year from the date of purchase. SHM International Corp. at its option, will repair or 

replace this product or any component of the product found to be defective during the warranty period. Re-

placement will be made with a new manufactured product or component. If the product is no longer available, 

replacement may be made with a similar product of equal value. This warranty does not include transportation 

or shipping costs of any kind. This your exclusive warranty. 
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transfer-

able. Keep the original sales receipt. Proof of purchase is required to obtain warranty parts. 
This warranty does not cover normal wear of parts such as scratches and dents of the components or damage 

resulting from any of the following:
•  negligent use or misuse of the product, including exposing the product to chemicals or cleaning products not 

approved by SHM International Corp.

•  corrosion, rust or discoloring of any kind
•  use or installation contrary to 

 instructions and applicable building codes, including heating the 

product to temperatures above its rated specifications which can cause considerable warping

•  disassembly, including removal of the product from a built-in installation
•  damage resulting from accident, alteration, misuse, abuse, hostile environments, or improper installation
•  repair or alteration
•  acts of God, such as 

 

 hurricanes, and tornadoes

•  gas cylinders, propane tanks or other fuel delivery systems, including connections to a household fuel supply
•  usage other than single-family household use such as commercial or industrial use
•  minor warping or discoloration of parts, which is normal and not a defect under this warranty

DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE

If the appliance does not operate properly, first thoroughly carry out the instructions provided with the unit to 

ensure that the appliance is installed correctly and check the troubleshooting section in the use and care manual.
We recommend you return the warranty registration card so that you can be contacted when any questions of 

safety arise that could affect you. The return of the warranty registration card is not a condition for warranty 

coverage.
Because of continuing product improvement, these specifications are subject to change without notice.

If you have other questions or need replacement parts, contact our  

Customer Service Hotline at (800) 229-5647 or  

visit our website at www.sureheat.com.

SHM International Corp.  3140 Moon Station Road,  Kennesaw, GA 30144

 

RTP2011A

Summary of Contents for Premier Estate PEVFR18LP

























Reviews: