Shinko Electric CHC-S2145, Operation Manual

Page: 8 / 36

Chapter 1. Important Safety Instruction
1-3
Handling Instruction
In handling the printer, please pay attention to the followings;
Warning: Lift the printer from its box and put it onto a flat table or desk.
Warning: The printer is heavier at front side than rear side so that please be
careful in transportation.
When moving the printer, hold the handles provided at the front and
the rear.
The printer must be handled by more than two persons during the
transportation.
Warning: Be careful when you transport the printer on the slippery floor.
Warning: In case you drop the printer, firstly turn off the power of the printer
and remove the power cord, then contact the dealers or service
center. To use the printer without any checking, can cause the fire or
electric shock.
Attention: At installation, appropriate interface cable will be required with your
computer.
Warning: At nearly 20Kg, the printer is too heavy to be lifted by one person.
Also please take a good care of your hands and fingers when lifting
the printer from the box.
Warning: Do not dismantle or remodel the printer.
Some sections of the printer contain a high voltage or become very
hot. Ignoring this warning may cause electric shock, fire, or burns.