Shinko Electric CHC-S2145, Operation Manual

Page: 27 / 36

Chapter 4. Routine Maintenance
4-2
4. Using gauze dipped with isopropyl alcohol or
ethyl alcohol, clean the rubber section of the
cleaning roller (paper feed side).
5. The cleaning roller (ejection side) can be
removed by pulling the black knobs on the
left and right sides.
6. Using gauze dipped with isopropyl alcohol or
ethyl alcohol, clean the rubber section of the
cleaning roller (ejection side).
7. After cleaning, return the rollers to the
original positions and insert until it clicks
into position.
Attention: Printing should be performed after the alcohol dried up
completely (approx. 5 minutes)