Shining 3D EinScan SE/SP_User Manual_3.1.1
45
3-2-1 Movement
Prior to 3-2-1 movement, the creation of a plane, line not normal to the plane and point are required.
3-2-1 movement (plane-line-point alignment) aligns the data by deletion of the Degrees of Freedom.
The arrows represent the global coordinate system, Red=X+, Green=Y+, Blue=Z+
3-2-1 Movement menu
Select a Plane in the drop-down menu, match it to the first axis in the Method drop-down. The
arrows on the corners of the plane represent the plane positive direction. The normal vector of
the plane will match the axis direction.
Select a Line in the drop-down menu, match it to the first axis in the Method drop-down. Beware
the direction of the line to match it to the + or - axis. The projection of the line to the first plane
will be parallel to the corresponding axis
Select a Point in the drop-down menu. The data will be translated to match the point with the
origin point (coordinate 0,0,0)
Click
Align
to perform the transformation
Data after 3-2-1 movement
Click
Reset
to cancel
Click
Apply
to confirm the transformation.