Shining 3D EinScan SE/SP_User Manual_3.1.1
24
5.2.5.
Turntable Turn
Turntable turn
Set turntable turns corresponding to turntable step and speed. One turn by default.
One turn: Turntable rotates for one turn.
Half turn: Turntable rotates for half turn.
5.2.6.
Alignment Condition
SE
SP
Select an alignment mode condition for the turntable scan.
Note
: For EinScan SP, other than alignment mode features displayed above, global markers alignment
feature is also available: Open
New Project
interface, import a global markers file. Then global marker
feature is displayed (shown below).