Shining 3D EinScan SE/SP_User Manual_3.1.1
16
Step 4: T
urn calibration panel 90° counterclockwise after step 2 as guided in software. Move bracket
with panel to the turntable left side (until the calibration board white edge is aligned with the yellow
line shown on the image).
After collecting calibration panel data,
the software will calibrate the camera automatically. You will
see the result as below. Calibration will take longer or fail if you did not follow all instructions properly.
When calibration succeeds, click “Next”
to move on to the White Balance as the software indicates.
Camera calibration result
If calibration fails, click “Redo calibration” to start the same calibration again from the beginning.
