Shining 3D EinScan SE/SP_User Manual_3.1.1
34
7.
Mesh
7.1.
Create Mesh (Watertight/Unwatertight)
When scanning and editing are completed, click ”
Global Optimization”, then click
to create
mesh. Two types of mesh are available: Watertight and Unwatertight.
If there are non-texture projects, there will be a data optimization option. After clicking it, the
amount of triangles will be optimized in less than 2,500,000 triangles.
If the projects are all with texture, the data optimization option will be unavailable. The software
will simplify the data by default.
Mesh Mode
Watertight
Unwatertight
All holes will be filled automatically. The data
can directly be 3D printed.
Unclosed model stays the way it is scanned.
Processing time is quicker than Watertight.
TEXTURE WATERTIGHT
The texture capture is separate from the 3d data capture. If the texture has been captured, it will still
be displayed on areas where holes are filled in the mesh processing. If the texture is missing, the
corresponding mesh data will be in black.
