40(44)
2) Check the lubricating oil:
a) Cut power off so to avoid electric shock and wait till the motor get cooled.
b) Open oil drain plug to take samples.
c) Check viscosity index of the lubricating oil.
If it is evidently turbid, please replace it as soon as possible.
d) Check the lubricating oil level and install oil level plug.
3) Lubricating oil replacement: Increased viscosity of the lubricating oil will
make it harder to discharge the oil, so better replace it when the motor is in
its operational temp.
a) Cut power off so to avoid electric shock.
b) Lay an oil pan under the oil drainage plug.
c) Open the oil level plug, air valve and oil drainage plug.
d) Drain all the lubricating oil out.
e) Install oil drainage plug.
f) Fill in new lubricating oil in same brand.
g) Tight up the oil level plug and air valve.
4) Brand of lubricating oils (ambient temperature : -10
℃
~40
℃
):
Mobil: Mobilgear 630
Shell: Shell Omala 220
Aral: Aral Degol BG 220
BP: BP Energol GR-XP 220
Texaco: Meropa 220
6.8 Maintenance
When carrying out maintenance, ensure that there is no material left in the
granulator.
Note: All repairimg must be conducted by professionals!
6.8.1 Daily Check
1) There is rubber shutter in the feed box. If the rubber shutter is damaged,
replace it immediately. Otherwise the fragment of the shutter will damage
the blades in the cutting chamber.
