21(44)
3. Installation and Debugging
Read through this chapter before installation.
Must abide by the following installation steps to avoid personnel injuries or
damage of the machine!
Take great care of handing the blades because they are very sharp and
may cause cutting injuries!
Power supply of the machine should be handled by qualified electricians!
Be careful!
Cutting blades must be put balanced, prevent it to rotate itself when do the
installation. Keep hands from blades to avoid body injuries!
Attention:
Don't take other person's help to finish the installation, use a wooden
board to block the rotating blade to finish it.
Notice!
Use protective gloves since the blades are very sharp.
Caution!
Must use new screw and washer to install the blade.
