27(44)
4.5 Start and Stop the Granulator
The granulator is controlled by main power switch, safety switch, START/STOP
button and emergency stop button.
Main power switch is located at the front control panel. And the startup and stop of
the machine is controlled through rotating the main poewer switch.
Picture 4-2: Main Power Switch
START button and STOP button:
These two buttons control the startup and stop of the machine.
Emergency stop:
This switch can protect and stop machine when accidents happens.
Picture 4-3: START, Emergency Stop and STOP Button
Note: If there are ungrinded materials in the feed box or cutting
chamber, the granulator shall NOT be stopped, otherwise raw
materials will block the rotor and the motor will be overloaded
next time you start the machine up.
