36(44)
4) Lock up plum blossom handle.
Picture 6-11: Installation of Feed Box, Feed Port and Storage Box 5
Note: Locknut is necessary for keeping screws falling into
cutting chamber.
6.4
Cutting Chamber Disassembly
6.4.1 Gear box dismantlement
Dismantle the screw of gear box
’
s fixed plate to push out the gear box directly
outward to separate the coupler;
Picture 6-12
：
Step 1 of Gear box Dismantlement
6.4.2 Dismantlement of left / right bearing base
1) Firstly disassemble the fixing screws of right bearing base and take down
the base;
Picture 6-13: Step 1 of Left /Right Bearing Base Dismantlement
2) Disassemble the fixing screws of left bearing base, take down the base
and the whole blade shaft together. Then dismantle the teeth cutter,
staggered blade.
