28(51)
4.1.2 Dehumidification and Drying Monitor Page
After a few seconds of countdown, the system initialization interface will enter the
dehumidification and drying monitoring screen, as below figure:
Picture 4-3: Drying Monitoring Screen
4.1.2.1 Drying Temperature Modification
Directly click the <SV> of drying temperature, and the numerical keypad will pop
up. Input the requested drying temperature and then press <ENTER> to confirm.
Picture 4-4: Drying Temp. Modification Screen
Note: The drying and regenerating temperatures all have the
maximum and minimum values. The default setting of
regenerating temperature is set to 180
℃
. No resetting is
permitted without permission!
4.1.2.2 Start-up and Shutdown
Press once the <Button of Switch> on Drying Monitoring screen to start machine,
and press once again the <Button of Switch> to stop the machine.Then, click
<Button of Switch> to make it turn grey, the system stops operation.
