27(51)
4. Application and Operation
4.1 Operation Procedure for HMI
Picture 4-1: Description of Touch Panel
Operation Notice
：
1) Avoid violent collision of the touch screen when operating it.
2) In dry environment, static electricity may be produced on the touch screen,
so a metal wire is needed to discharge it before operating.
3) Use alcohol or eleoptene to clean the touch screen, because other
solvents may fade it.
4) Do not tear down the touch screen or take away any PCB from it.
Otherwise, the component will be damaged.
4.1.1 System Initialization screen
After the system is powered on, the touch penal displays initial page. As below
figure:
Picture 4-2: System Initialization Screen
