Shindaiwa DGW340DM, Owner'S And Operator'S Manual

Page: 37 / 52

- 34 -
<Note>
•
Procedures except for pre-operation inspection must be performed by specialized
technicians.
•
Items indicated by  : Contact the retail outlet where the equipment was
purchased.
•
Always be sure to use genuine parts when replacing parts.
•
When removing waste liquid from the equipment, place some container to collect
the liquid and prevent it from spilling on the ground. Dispose of such oil, fuel,
cooling water (LLC), filters, batteries and other harmful substances as industrial
waste in accordance with applicable laws and regulations. Consult with the retail
outlet where the equipment was purchased if you have any inquiries regarding
proper disposal.
•
When performing maintenance with the side door and other parts open, be sure
that no other persons can accidentally come close to the equipment. Close all
doors and covers if momentarily leaving the equipment unattended.
Inspection Item
Pre-
Operation
Inspection
Inspection Period
50th
hour
Every
100
hours
Every
200
hours
Every
400
hours
Every
1000
hours
Every
2000
hours
1 Inspect/Add Fuel 
2 Inspect/Add Engine Oil

3 Change the Engine Oil
1st time

2nd time
and after

4 Change the Oil Filter
1st time

2nd time
and after

5
Inspect/Add Cooling
Water

6 Change Cooling Water

or 2 years
7 Clean Fuel Strainer
1st time

2nd time
and after

8 Replace Fuel Element

9
Drain Water from/Clean
Fuel Tank

10
Inspect for Fuel/Oil/
Cooling Water Leakage

11 Inspect/Add Battery Fluid 
12 Clean Air Element
1st time

2nd time
and after

13 Replace Air Element 
14
Drain Liquid from Spill
Containment

15 Adjust V-belt Tension
1st time

2nd time
and after

16 Replace V-belt

or 2 years
17
Clean Radiator Fan
(External)

18
Clean Radiator Fan
(Internal)
