![background image](http://html1.mh-extra.com/html/shindaiwa/dgw300ms-ukv/dgw300ms-ukv_owners-and-operators-manual_1257616018.webp)
- 13 -
5-3. Monitor Lamp
Warning: Injury/Electric Shock
Do not operate the equipment with any doors or covers open. There is a danger of
hair, body parts and other items being caught up in moving parts such as cooling
fans and belts.
Caution: Burn
The engine, muffler and similar parts are extremely hot during operation and
immediately after stopping the equipment. Never touch hot parts.
Never open the radiator cap during operation or immediately after stopping the
equipment. Hot cooling water and steam will spurt out.
Always be sure to stop the engine and allow it to cool before inspecting or changing
the engine oil. Opening the oil gauge or oil plug during operation will result in hot oil
spurting out.
The equipment includes monitor lamps for water
temperature, battery charge, oil pressure.
If the equipment is normal, the "CHARGE", "OIL PRESS"
monitor lamps illuminate when the starter switch is
switched to "STOP" to "RUN", and all monitor lamps turn
off when the engine is started. If any error occurs during
operation, the corresponding monitor lamp illuminates
and the engine is automatically stopped. If the engine is
automatically stopped, return the starter switch to "STOP"
and restart the engine. Watch the lit/unlit status of the
monitor lamps the next time an automatic stop occurs and
check the error contents.
(1)
Water Temperature Monitor Lamp
The water temperature monitor lamp ("WATER TEMP") illuminates and the engine is
automatically stopped if the cooling water temperature becomes irregularly high during
operation. If this occurs, inspect the water level of the sub tank and add cooling water if
the water level is insufficient. (Refer to section "7-2 Cooling Water Inspection".)
If the cooling water in the sub tank is at the specified level, it is probable that
overloading is the cause. Use within the rated output.
(2)
Battery Charge Monitor Lamp
The battery charge monitor lamp ("CHARGE") illuminates and the engine is
automatically stopped if battery charge fails during operation. If this occurs, it is
probable that there is fan belt damage or a wiring fault. Request repair at the retail
outlet where the equipment was purchased.
(3)
Oil Pressure Monitor Lamp
The oil pressure monitor lamp ("OIL PRESS") illuminates and the engine is
automatically stopped if the engine oil pressure drops during operation. If this occurs,
inspect the engine oil level and fill with engine oil until it reaches the maximum level.
<Note>
The oil pressure monitor cannot detect oil deterioration. Change the engine oil
periodically. (Refer to section "12. Inspection/Maintenance".)
The charge monitor cannot detect battery deterioration or insufficient battery fluid.
Inspect the battery fluid level periodically. (Refer to section "7-5 Battery Inspection".)
Inspect the fuses if the engine is automatically stopped and none of the monitor lamps
("WATER TEMP", "CHARGE" and "OIL PRESS") illuminate. (Refer to section "4. Part
Names" for fuse location.)
If a fuse has blown, it is probable that there is a fault in an electric part or the wiring.
Request repair at the retail outlet where the equipment was purchased.
Battery
Charge
Water
Temp
Oil
Press
Summary of Contents for DGW300MS/UKV
