Shindaiwa DGW200MS/UK, Operator'S Manual

Page: 4 / 36

- 3 -
Caution : Explosion
Do not use the equipment or charge the battery, if the battery fluid level is lower
than the LOWER level.
The battery may emit combustible gas, so keep it away from fire and sparks.
Caution: Fire
The equipment uses Diesel fuel. When inspecting the equipment or refueling,
always stop the engine and keep away from fire. Always wait until the engine
cools down before refueling.
Always wipe any drip of fuel or lubrication oil. Do not use this equipment if a leak
is found. Repair the leak before use.
Temperature around muffler and exhaust can get extremely high. Keep any
inflammable items (such as fuel, gas, paint, etc.) away from the equipment.
Keep any inflammable items and combustible items away from the welding area,
as welding creates hot sparks.
Always operate this equipment on flat surface with at least 1 metre clearance
from all objects.
Do not connect AC output to any indoor wiring.
Always wait until the equipment cools down, before covering for storage.
Do not allow children near the equipment. Keep children at a safe distance from
the machine at all times.
Caution: Burns
Do not touch the engine and muffler during operation or immediately after
stopping the equipment, as the temperature will be extremely high.
When checking engine oil or changing oil, always stop the engine, and wait until
the engine cools down.
Be sure to wear leather gloves, apron, shoe covers, eye protection
glasses/mask, safety shoes, safety cap, and long sleeve shirts, to protect from
sparks.
Do not open the side panel during operation or immediately after stopping the
equipment, because some parts/components (flexible tube, resistors etc.) can
reach very high temperatures inside the equipment.
Caution: Injuries
When lifting the equipment, always use the top-mounted lifting lug. Do not lift
using the positioning handles.
Always use appropriate lifting gear and secure adequately during transportation.
Always place the equipment on a flat and stable surface, and fix the wheels
using the brake, to prevent equipment movement
When starting the engine, turn off all connected equipment and set the AC
output switch to the OFF position.
Do not move the equipment during operation.
When performing equipment checks and maintenance, always stop the engine.
Do not operate the equipment, if equipment is faulty or if there are missing parts.