Shindaiwa DGW200MS/UK, Operator'S Manual

Page: 14 / 36

- 13 -
6. Initialization and Pre-check
Caution : Fire ・ ・ ・ ・ Burns ・ ・ ・ ・ Injuries
When checking the engine, always stop the engine, and wait until the engine
cools down, before performing any checks.
6-1. Checking Engine Oil
When checking for engine oil, be sure to
keep the equipment level, and insert
the oil gauge all the way in.
Prior to starting the equipment, make
sure to fill the engine oil to the UPPER
line through the engine oil plug.
Oil Volume: about 2.0L (Total)
Effective Oil Volume: approx. 0.7L
(from the lower limit to higher limit)
<Caution>
If the equipment is not level, you cannot obtain an accurate oil level.
Do not overfill (over UPPER line) the engine oil. The excessive volume of engine oil
may damage the engine.
Selecting correct engine oil
Use engine oil for Diesel
engines of the correct viscosity, in
compliance with the ambient
temperature (Refer to the chart).
<Caution>
Use the API class CD or higher.
Viscosity and Temperature
Temperature Over +20
℃
+10
～
+20
℃
-10
～
+40
℃
Viscosity SAE30 SAE20 SAE10W/30
6-2. Checking Coolant / Water
Danger: Injuries
Close and lock all equipment doors during operation of this equipment, to
avoid injuries by unintentionally touching cooling fan and fan belt.
Do not open the radiator cap while operating this equipment or immediately
after stopping the equipment, to avoid burns from hot steam or water.
Caution: Burns
Do not touch the engine or muffler during operation or immediately after
stopping the equipment, as the temperature will be extremely high.
OIL GAUGE
UPPER LIMIT (2L)
LOWER LIMIT
EFFECTIVE
OIL PLUG
(OIL INLET)