Shindaiwa DGW200MS/UK, Operator'S Manual

Page: 31 / 36

- 30 -
12. Long-Term Storage
Danger: Electric Shock
Before performing any equipment check or maintenance, stop the engine, and
remove the engine key. The person performing the maintenance must always
keep the key.
Caution: Injuries
Before performing any equipment check or maintenance, stop the engine, and
remove the engine key. The person performing the maintenance must always
keep the key.
Caution : Fire ・ ・ ・ ・ Burns
When checking engine, always stop the engine, and keep away from fire.
Temperatures around muffler or exhaust can be extremely high. Wait until the
engine cools down, before performing any checks.
If the welder-generator is not be used for more than two months, perform the
following maintenance and storage procedures.
①
Remove the battery.
②
Change the engine oil.
③
Drain fuel from the fuel tank and the fuel strainer.
④
Clean all parts, cover the welder-generator, and store away from dust and
humidity.
<Caution>
Recharge the removed battery once a month.
13. Troubleshooting
Danger: Electric Shock
Do not touch the equipment, if the equipment or you are wet.
Before performing any equipment check or maintenance, stop the engine.
Caution: Injuries
When performing equipment check and maintenance, always stop the engine.
Caution : Fire ・
・ ・
・ Burns
When checking engine, always stop the engine, and keep away from fire.
Temperatures around engine, muffler or exhaust can be extremely high.
Wait until the engine cools down, before performing any checks.
Follow the guidelines below, when performing any troubleshooting. If you cannot
resolve the problems by this troubleshooting guide, contact the authorized distributor
or dealer to request the repair.