Shindaiwa DGK180F, Owner'S And Operator'S Manual, Page: 54 / 66

51
Radiator Plate
Radiator Cap
&
Filler Neck
LOW
FULL
Sub-Tank
Radiator
Coolant
Drain Plug
Engine
Coolant
Drain Plug
(12) Coolant Replacement
Replace Every 1000 hours or every 1 year
Set a container to catch spilled coolant.
Remove the radiator plate.
Remove the radiator cap.
Remove the radiator coolant drain plug.
Loosen the engine coolant drain plug.
Apply sealant coating to the radiator coolant drain
plug or wrap it in seal tape.
After the coolant has been drained, tighten the
coolant drain plug.
Remove the sub-tank and flush the coolant from
the sub-tank.
Reattach the sub-tank to its original position and fill with coolant until it reaches the FULL
level.
Fill the radiator with coolant until it reaches the filler neck.
Re-attach and tighten the radiator cap.
Attach the radiator plate.
< Note >

After reinserting the coolant drain plug and shortly after starting the engine, be sure to always
check that there is no coolant leakage.
1
2
3
4
5
6
7
8
9
10
11
12