Shindaiwa DG25MK, Assembly And Instruction Manual

Page: 42 / 48

39
(2) Double-Stacking Storage Procedures
WARNING : INJURY
Always be sure to observe the following items when double stacking this generator in a
warehouse or similar location.

Check that the Top cover of this generator is not
dented, and that bolts are not loosen or missing.

Set in a location with a flat hard floor capable of
withstanding the double-stacking weight.

Always be sure to use lifting hooks when lifting this
generator.

Insert wood ties of the same size and that are wider
than this generator between each generator, and set
another generator on top of the ties.

Never stack more than two levels, and do not set a
generator on top that is larger in weight/size than that
on the bottom.

Do not operate the generator when it is double stacked.
WARNING : ELECTRIC SHOCK/INJURY

Do not touch output terminals or internal electric parts while the generator is
operating.

Do not open the check door when the Power Switch is in the ON position. It
will cause injury by rotating parts such as cooling fans and fan belt.

Always turn the Power Switch to the OFF position and stop the engine, then
close and lock OPERATION PANEL DOOR before checking or maintaining
the engine or any equipment.
CAUTION : FIRE

Never allow flame to come close to the generator.
CAUTION : BURNS

Do not touch the engine and surrounding components immediately after
stopping the engine as they are still extremely hot.
Inspect this generator when operation is poor to determine the fault/malfunction.
Request the authorized distributor where the generator was purchased to perform
maintenance if you cannot find any faults/malfunctions during inspection.
12. Troubleshooting