Shimano ALFINE BL-S705-L, Dealer'S Manual

Page: 7 / 95

7
TO ENSURE SAFETY
„
Battery charger/Battery charger cord
SM-BCR1: Battery charger for SM-BTR1
• Hold the power plug when connecting or disconnecting the plug. Failure to do so may cause a fire or electric shock.
• If the following symptoms are observed, stop using the device. A fire or electric shock may be caused.
* If heat or acrid-smelling smoke is coming out from the power plug.
* There may be a bad connection inside the power plug.
• Do not overload the electrical outlet with appliances beyond its rated capacity, and use only a 100 – 240 V AC electrical outlet. If the electrical outlet is
overloaded by connecting too many appliances using adapters, overheating resulting in fire may occur.
• Do not damage the power cord or power plug. (Do not damage, process, let near hot objects, bend, twist or pull them; do not place heavy objects on
top or bundle them tightly.) If they are used while damaged, fire, electric shocks or short-circuits may occur.
• Do not use the battery charger with commercially-available electrical transformers designed for overseas use (travel converters). They may damage the
battery charger.
• Always be sure to insert the power plug as far as it will go. If this is not observed, fire may occur.
SM-BCR2: Battery charger for SM-BTR2 / BT-DN110 / BT-DN110-A
• Do not use any USB cable other than the USB cable which is supplied with the PC linkage device. This may cause a charging error, fire, or failure to
connect to PC due to overheating.
• Do not connect the charger to PC when it is on standby. This may cause a PC failure depending on its specifications.
• When connecting or disconnecting the USB cable or the charging cable, be sure to hold the cable by the plug. Failure to do so may cause a fire or
electric shock. If the following symptoms are observed, stop using the device. A fire or electric shock may be caused.
* If heat or acrid-smelling smoke is coming out from the power plug.
* There may be a bad connection inside the power plug.
• If it thunders while charging with an AC adapter with a USB port, do not touch the device, bicycle, or the AC adapter. If lightning strikes, electric
shocks may occur.
• Use an AC adapter with a USB port with a voltage of 5.0 Vdc and with a current equal to or higher than 1.0 Adc. If the one with a current lower than
1.0 Adc is used, a charge error may occur or the AC adapter may heat up, leading to a fire.
• Do not use a USB hub when connecting the cable to a computer USB port. This may cause a charging error or fire due to overheating.
• Be careful not to damage the charging cable. Do not damage, process, let near hot objects, bend, twist or pull them; do not place heavy objects on top
or bundle them tightly. If they are used while damaged, fire, electric shocks or short-circuits may occur.
„
Brake
• Because each bicycle may handle slightly differently depending on the model, be sure to learn the proper braking technique (including brake lever
pressure and bicycle control characteristics) and operation of your bicycle. Improper use of your bicycle's brake system may result in a loss of control,
which could lead to serious injury due to a fall or collision.
• Do not apply the front brake too strongly. If you do so, the front wheel may lock and the bicycle may fall forward, and serious injury may result.
• Because the required braking distance will be longer during wet weather, reduce your speed and apply the brakes early and gently. You may fall or
collide and be seriously injured.
• A wet road surface may cause tires to lose traction; therefore, to avoid this, reduce your speed and apply the brakes early and gently. If the tires lose
traction, it may result in serious injury due to a fall or collision.