Shimano ALFINE BL-S705-L, Dealer'S Manual

Page: 15 / 95

15
TO ENSURE SAFETY
• The strength of the adhesive is fairly weak to prevent the paint on the frame from being peeled off when removing the electric wire cover/cord cover,
such as when replacing the electric wires. If the electric wire cover/cord cover is peeled off, replace it with a new one. When removing the electric wire
cover/cord cover, do not peel it off too vigorously. Otherwise, the paint on the frame will peel off, too.
„
Cord clip
• EW-CL300-S is marked with a groove in order to differentiate it from EW-CL300-M.
Differentiation
groove
EW-CL300-M EW-CL300-S
„
Conversion adapter
• A conversion adapter (EW-AD305) is required to connect the EW-SD50 to a component with an E-TUBE port for the EW-SD300.
Electric wire (EW-SD300) Electric wire (EW-SD50)
Conversion adapter (EW-AD305)
„
Dual control lever
• Dummy plugs are installed at the time of shipment from the factory. Do not remove them except when necessary.
• When routing the electric wires, take care to ensure that they do not interfere with the brake levers.
„
SM-BMR1/Battery mount
• This is supported by the firmware versions 2.0.0 and later.
The actual product may differ from the illustration because this manual is intended mainly to explain the procedures for using
the product.