Shimano ALFINE BL-S705-L, Dealer'S Manual

Page: 66 / 95

66
To be continued on next page
OPERATION
About wireless functions (SC-MT800)
„
About wireless functions (SC-MT800)
Functions
ANT
®
connection
ANT
®
connection facilitates the transmission of the following three types of information to compatible
cycle computers or receivers.
(1) Gear position (rear)
(2)
Di2 battery level information (External type: BM-DN100, Built-in type: BT-DN110 / BT-DN110-A)
(3)
Adjustment mode information
For information on which of the above types of information are displayed, refer to the manual for your
cycle computer or receiver.
TECH TIPS
The latest functions can be checked by
updating the software via E-TUBE PROJECT
Cyclist.
Bluetooth
®
LE connection
E-TUBE PROJECT Cyclist may be used if a Bluetooth ® LE connection is established with a smartphone.
How to make connections
ANT
®
connection
To make a connection, the cycle computer needs to be in connection mode. For information on how to put the cycle computer into connection mode,
refer to the manual for the cycle computer.
1
Put the cycle computer into connection mode.
2
When using an external battery
Check that the electric wires are connected to the system information display, and then
remove and remount the external battery.
When using a built-in battery
Check that the electric wires are connected to the system information display, and then
remove the electric wires from the system information display and reconnect them.
TECH TIPS
Connection transmission begins about 30
seconds after the battery is remounted or the
electric wires are reconnected to the system
information display.