62
15. Connecting Peripheral Instruments
Read Chapter 7 Before Use of
These Pages
15. Connecting Peripheral Instruments
(For WindowsDirect, refer to
A variety of peripheral instruments are available for use with the UW/UX series balance, such as an
electronic printer, keyboard or personal computer.
This chapter describes how to connect and communicate with peripheral instruments.
The details of the balance's communication settings are described in 15.3.
15.1 Electronic Printer EP-50/EP-60A
• EP-50 here includes EP-50WIN.
1
For the balance, select the default communica-
tion settings.
2
Disconnect the power to the balance and EP-
50/EP-60A Electronic Printer.
3
Connect the DATA I/O connector of the balance
to the EP-50/EP-60A using the attached cable of
the EP-50/EP-60A.
4
First turn ON the power to the balance, then
turn ON the power to the EP-50/EP-60A.
Menu item
number
Setting
Handshaking,
Timer
Format,
EB type
Baud Rate,
1200 bps
Parity, None
Stop bit, 1 bit
Delimiter, CR
76
77
83
89
92
94
DATA I/O Connector
Notes
• Calculation functions of EP-50 (statistic calculation function, multiplica-
tion of constants etc.) cannot be used with the unit other than g, kg, mg,
%, PCS, ct, and mom.
• Before printing the data other than normal measured value (date, report
of sensitivity calibration etc.), turn off the number printing function (auto-
matic count-up) of EP-50.
