manualshive.com logo in svg

Shimadzu UW2200H, Instruction Manual, Page: 2 / 106

Share
Download
Shimadzu UW2200H Instruction Manual Download Page 2

- I -

Read These 

Pages 

Before 

Installation

Other conventions used in this manual include:

   Note

This instruction manual uses the following notation conventions to indicate
Safety Precautions and additional information.

 Caution

Indicates a potentially hazardous situation that may
result in injury to personnel or equipment damage.

  Note

Provides additional information needed to properly
use the balance.

Item

Description

1, 2, 3 ....

Indicates the step number in a procedure or a sequence of changes in the balance display.

[   ]

 key

Indicates the operation key on the balance. See 

2.2

.

mass display

Indicates that the balance is in the weighing mode and mass is displayed in one of the weigh-
ing units.

These sections include information to make using the balance more convenient.

Indicates the menu item to be selected.
The number in the

 

 

is the number of the menu item on the Menu Map.

See 

7.2 “Menu Map”

.

 

No.

Notation Conventions

Summary of Contents for UW2200H











































































































Reviews:

No comments