9
4. Installation
Read These
Pages
Before
Installation
4.3 Installation
(Start at step
3
when installing a UX series balance. Prepare a plus (+) screw driver for a UW series
balance.)
1
Place the balance main body upside down.
(UW only)
2
Referring to the explanation label on the bottom
of the balance, turn the two transportation screws
counterclockwise until they tighten again.
(UW only)
3
If you install the protective in-use cover, remove
the paper to expose the double-sided tapes on it
and place it on the balance main body. Press firm
so that the cover does not touch the pan.
[The shape of the protective in-use cover may be
different (See
).]
Caution
Do not operate step
2
with the balance placed
on its side.
Place the balance on a smooth surface.
Transportation screws
(only for UW series)
Below-weigh
hook cap
Explanation label (only for UW series)
Caution
When moving the balance again, turn the two
transportation screws clockwise until they
tighen. (UW only)
Double-sided tapes (16 places)
[ Large pan model]
Transportation screws
