28
8. Built-in Clock Set-up
Read Chapter 7 Before Use of
These Pages
8. Built-in Clock Set-up
The built-in clock has to be set up in advance if a calibration record is to be produced or Clock-CAL
function is to be used.
8.1 Date
1
Select menu item
and set the last two fig-
ures of the year, month and day, using the
[UNIT]
and
[PRINT]
keys.
Example:May 15
th
, 2002, set as “02.05.15”
Example:February 29
th
, 2004, set as “04.02.29”
2
Then press the
[O/T]
key.
8.2 Time
Select menu item
and set the time in the 24 hour
system using the
[UNIT]
and
[PRINT]
keys, then
press the
[O/T]
key.
Example: 1:23 in the afternoon, is set as “13:23”.
63
(Example)
Notes
• The built-in clock corrects for the leap year automatically.
• The moment the
[O/T]
key is pressed to finish setting, seconds are set
to zero. If the is set after setting the time, the second value will be incor-
rect. It is important to set the first and then the time, or to correct the
seconds value using the
±
second correcting function described in sec-
tion 8.3.
64
(Example)
Note
The moment the
[O/T]
key is pressed seconds are set to 00.
