17
6. WindowsDirect Function
6.2.2
Cable Connection
1
Verify the balance display is “STAND-BY”.
2
Turn off the computer and disconnect the
power cord from the balance.
3
Connect the RS-232C cable to the balance.
4
Connect the RS-232C cable to the computer.
6.2.3
Setting Up the Computer
(leave the balance unplugged)
1
Turn ON the power to the computer and start
Windows
®
*.
2
Click “Start”, choose “Settings”, and “Control
Panel”.
3
Select “Accessibility Options.”
4
Verify that there are no check marks for any
items on all five tabs including “General.”
5
Put a check mark at “Support Serialkey device”
in the “General” tab. This should be the only
check mark on all the tabs of Accessibility Options
unless “Administrative options” appears in the
“General” tab. Put check marks at both the items
of “Administrative options” to maintain the set-
tings even after restarting Windows
®
.
6
Open “Settings”.
RS-232C Connector
