Shibuya Hoppmann L500A V2, Installation & Maintenance Manual

Page: 78 / 92

L500A V2 High Speed Labeler Manual
78 79
TIMER 1
This parameter helps to solve the problem of over‑torquing the motor.
Set the value to allow the motor to come to rest before “ramping up” to
advance web if there is more than one consecutive missing label.
a
Min Value: 0 (ms); Max Value: 10000 (Hz)
a
Default value: 0
TIMER 2 - AUXILLARY TIMER
This parameter helps to solve the problem of over‑torquing the motor.
Set the value to allow the motor to come to rest before “ramping up” to
advance web if there is more than one consecutive missing label.
a
Min Value: 0 (ms); Max Value: 10000 (Hz)
a
Default value: 0
Diagnostics
DIAGNOSTICS
The diagnostics function can be used
to check the function of all the sensors
in the labeling system (label sensor,
product sensor, incremental encoder)
in addition to displaying the label cycle
count (see Figure 5‑9).
To activate the diagnostics mode,
switch to the Parameter menu, then
select DIAGNOSTICS and press
enter.
Figure 5-9. Diagnostics Screen
BLS 2020 M188
_ _ _ _ _ _ _ _ _ _
L-SENS
EXIT _ _ _ _ _ _ _ _ _ _
+1234
+ 56789
ENCODER/SENSOR DIAGNOSTICS
P-SENS
FALSE TRUE
Encoder
Increment
Count
Label Cycle
Count
Label
Sensor
Status
EXIT
Diagnostics
Screen
Product
Sensor
Status
+
TIMER 1
+0 [ms]
PARAMETER - SETUP
-EXIT ENTER
SCRUP SCRDN
+
TIMER 2
+0 [ms]
PARAMETER - SETUP
-EXIT ENTER SCRUP SCRDN