Shibuya Hoppmann L500A V2, Installation & Maintenance Manual

Page: 73 / 92

72 73
AIR ASSIST DWELL
Used to help push the label further onto the blow assembly.
Larger number to keep the air assist valve activated for more time.
Smaller number to keep the air assist valve activated for less time.
a
Sets how long air assist valve stays activated to blow the label up
onto the blow assembly.
a
Min Value: 0 (ms); Max Value: 99999 (ms)
a
Default value: 0
Parameter Menu - Jog
LOW SPEED
Sets the low speed in the jog mode. It also defines the speed in LABEL
TEACH mode.
a
Min Value: 1 (Hz); Max Value: 20000 (Hz)
a
Default value: 100
HIGH SPEED
Sets the high speed in the jog mode.
a
Min Value: 1 (Hz); Max Value: 20000 (Hz)
a
Default value: 1000
ACCEL./DECEL. SPEED
Acceleration / Deceleration speed is the time the motor takes to obtain
(reach) jog speed.
The smaller value = less time for the motor to reach speed.
The larger value = more time to reach maximum speed.
a
Min Value: 1 (ms); Max Value: 1000 (ms)
a
Default value: 50
Chapter 5 Operator Interface
+
LOW SPEED
+100 [Hz]
PARAMETER - JOG
-EXIT ENTER SCRUP SCRDN
+
HIGH SPEED
+100 [Hz]
PARAMETER - JOG
-EXIT ENTER
SCRUP SCRDN
+
ACCEL./DECEL. RAMP
+50 [ms]
PARAMETER - WIPE
-EXIT ENTER
SCRUP SCRDN
+
AIR ASSIST DWELL
+00000 [ms]
PARAMETER - TAMP
-EXIT ENTER SCRUP SCRDN