Shenzhen Nowforever Electronics Technology DK00 Series, User Manual

Page: 63 / 127

Detailed Function Description
50
When inverter went wrong, after delaying 0.5s, will auto clean fault
according to auto reset times of fault, and send run command to
inverter.
When P0-039 is set to be 0, it means
“
auto reset
”
is invalid, and
the fault times will be cleared.
Notice: After normal running for 60s, the fault times occurred in
the past will be cleared.
P0-040
Restart after power off
Setting range
：
0
～
Factory value
：
0
instantaneous 1
0: invalid.
1: effective. When running the bus voltage is too low result in
under-voltage fault occurs, the inverter will automatically reset the
fault, and then run automatically.
5.1.8 Multi-step speed
P0-041
Muti-step speed
0
Setting range
：
0.00
～
600.00Hz
Factory value
：
0.00Hz
P0-042 Muti-step speed Setting range
：
0.00
～
Factory value
：